Originally Posted by
UNSTUCK
I'm also doing an L92/6L swap, but into a Jeep LJ. Working on the CC. I read somewhere that if the wheel speed sensors are not there the CC will not work. I have an alldata schematic on the CC that only shows BCM input from the transmission speed sensor, and nothing with the wheel speed sensors. Can one of you that has made CC work confirm that the wheel speed sensors are not needed?
Has any more been figured out with the 10 minute timer? I have the full donor vehicle so I could get the driver door module, but I run the jeep without doors quite a bit, so that seems like a hassle to mess with a door switch. Maybe it needs a micro spring switch that actuates with the shifter when put in park. Or something.
Reply With Quote