Info on 5.3 swap

[Bms86]

Looking for info I have a 2000 Silverado 5 speed 4.3 bought a donor truck it's a 2000 Silverado with 5.3 an automatic transmission I want to take the donor trucks motor witch is the 5.3 engine and put it behind my 5 speed truck only difference between the two trucks is donor truck is extended cab with automatic transmission already have motor pulled and all the wiring pulled from the donor already have they 4.8 fly wheel for my manual transmission what steps do I need to take with the whole tuning part I will probably be putting a cam in the 5.3 before I install it behind my 5 speed any information tords the right direction would greatly be appreciated thank you

[Mikeloko]

whats the question?

[Bms86]

What all do I need to program the truck like the post is asking

[bk2life]

what steps do I need to take with the whole tuning part

What all do I need to program the truck

like the post is asking

Well first off a grammatically correct paragraph with full sentences so we can understand the question.
And then when follow up questions are asked, don't reply back with attitude, as it wont get you very far in here.

the steps you need to take is:
1. google how to tune a gen 3, so you have an idea of what needs to be done
2. datalog your engine when it is running
3. post your tune and datalogs after you have followed the google information
4. read the advise given and then do with it as you please