It's 2013 Silverado 4x4 5.3 with a sloppy stage 2 cam kit with pushrods valve springs DoD delete and vvt delete stock intake and exhaust. It's only running on 4 cylinders
It's 2013 Silverado 4x4 5.3 with a sloppy stage 2 cam kit with pushrods valve springs DoD delete and vvt delete stock intake and exhaust. It's only running on 4 cylinders
real hard for the tune to cause it too only run on 4 cylinders. Did you swap the lifters?
No tune, no data log, all anyone can do is guess. You possibly didn't turn off the DoD correctly. That could cause it to run on 4.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
It could be mechanical, electrical, fuel, ignition, or possibly tune related. Start with these first and get back with us.
<<< A standard approach will give you standard results >>>
My Free Tuning Software:
VVE Assistant [update for v1.5]
MAF Assistant
EOIT Assistant
thats the stock tune
Does this mean you haven't changed anything in the tune, including the DOD settings?Originally Posted by bkramtruck
Attach the file directly into the forum. Most people aren't going to mess with linked files.
this is the stock tune
This will get it back on 8 cylinders.
2013 silverado lt tyeschulz DOD off.hpt
[email protected] - [email protected]
Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs
thank you. my apologies the guy told me it was a sloppy mechanics stage 2 kit. it is actually a BTR GEN III & IV TRUCK CAM - STAGE 2 - V2
BTR31218110 (212/218 .553/.553 111+0)
Reply With Quote