2022 Jeep Gladiator with Magnuson Supercharger

[Gladus]

hi all, i recently purchased a 2022 jeep gladiator rubicon and it has a magnuson supercharger installed and tuned with hp tuners.

i had a friend with a mpvi3 come and plug in to determine if my tune was unlocked and luckily it was so i have gone ahead and purchased my own mpvi3 and 6 credits
2 for ecu and 4 for tcu as i mainly want to adjust trans shift points as it holds onto the gears too long.

im new to hp tuners but not to tuning. this jeep is real thirsty on fuel (20 litres per 100klm) so while i wait for the mpvi3 to arrive i have been diving deep researching how too's etc and so far i have found out the current tune was done with neural network enabled and using tuner tools neural network trainer which looks interesting and i will research more into this as ive never seen anything like this before .

could somebody please look at the attached tune file and let me know your thoughts:

JEEP.hpt

also is the vehicle already equipped with wideband o2 sensors or should i be looking at installing them as my main goal besides the trans shift points is to improve fuel consumption on light throttle

thanks your help and advice is appreciated.

[N2speed]

post a data log as that will tell more of the story then the actual tune file.