Manual shifter mode how to stop it jumping down gears when i 100% throttle

[Gladus]

hi all , when i move my shifter over to manual mode i dont want the transmission to change down gears. if im in 4th at 3000rpm and put the foot to the floor i want it to stay in 4th gear.. same goes for all the gears.

what do i have to change to make this work?

2022 jeep gladiator rubicon 3.6 with magnuson supercharger zf8hp2 transmission.

JEEP 8HP - edit 2.hpt

thanks

[DodgeBoy_8HP]

Log and watch "shift ID".

In case shift ID 27, change table 44111 (Trans -> Shift Scheduling -> Shift Pattern -> On the right side of the table - downshift side, change to a lower value - as it fits to your needs). Example of value in the image attached.

If you need further support, send me an email

Manual_Mode.png

[Gladus]

Yes , shift ID in manual mode is table 28 , what figures do I have to put into downshift area to totally prevent the down shifts please

[DodgeBoy_8HP]

Yes , shift ID in manual mode is table 28 , what figures do I have to put into downshift area to totally prevent the down shifts please

If you want to avoid completely, change the downshift side (right side) to zero

[Gladus]

Thanks I’ll give it a go

[Gladus]

I did what you recommended but still downshifts in manual mode ? Any more suggestions

[DodgeBoy_8HP]

Do you have a log?

Is it downshifting once throttle is pressed or to not stall the engine?