Ran into a real weird issue yesterday

[Overclock This]

I was scanning the car yesterday, doing a few short WOT runs.
Twice from about 45 km/h I floored it and the engine reved just a little and the car went absolutely nowhere.
This is with Traction and Stabilitrac disabled.
I have attached the part of the scan that shows what happend.
I can't figure it out.
The only thing I can think of is that it's some sort of torque management.
I went WOT just under that speed as well as over that speed and it didn't do that.
I attempted the WOT from 40-45 twice and it did it both times.

Any ideas?
It's an 07 G6 GTP with the E67 PCM

[TotheNthRPM]

dead spot maybe? maybe the speed is too high to drop a gear (if its an auto)? could be the torque converter unlocking or something?

[S2H]

post the actual tune from the vehicle....
plenty of people can look and help yo find it


also..its always better to post the .hpl log file instead of exporting it to excel

[Overclock This]

Here's the .hpt file
I had a huge scan and it was hard to find the spot on the scan even for myself.
I cut and pasted it into an excel sheet so it was easier to see what was happening.

[EC_Tune]

Even with a huge scan, just let us know what frame range to look in.

[Overclock This]

Even with a huge scan, just let us know what frame range to look in.

Here's my .hpl

Thanks in advance for your help.