02 Z06 MAF and plugs

[zo6racerx]

Can anyone tell me if a 2002 Z06's mass air sensor contains the IAT? I"m trying to figure out if I need to unplug the MAF for VE tuning or not. How do I disable SES lights for MAF codes P0101, P0102, and PO103?

2nd question. What plugs are stock for this vehicle?

[Dirty Howie]

Can anyone tell me if a 2002 Z06's mass air sensor contains the IAT? I"m trying to figure out if I need to unplug the MAF for VE tuning or not. How do I disable SES lights for MAF codes P0101, P0102, and PO103?

2nd question. What plugs are stock for this vehicle?

MAF contains the IAT on the C5 ..... almost 100% sure it would be same for Z06.

Don't unplug the MAF for VE tuning. You put car into open loop and disable MAF by setting the MAF frequency fail to 0. You do this and disable SES lights in the Engine Diagnostics which is in the Editor.

Check on Corvette Forum for stopck plug info.


DH

[Street Legal]

yes 2001 and up corvettes the IAT is integrated in the MAF

[zo6racerx]

Thanks guys! I really appreciate it.

[2000C-5]

How do I disable SES lights for MAF codes P0101, P0102, and PO103?

Another way is to use the VCM Controls if you just want it off temporarily while you are tuning. It is located on the Scanner toolbar next to the little picture of an engine block. It says "on, off, 100%". Click it and the first block says MIL light, click "off".