Originally Posted by
adam112
Making progress with the idle!
The rich after reflash was screwing me up as it would kill the motor and make it swing wildly to maintain idle, also had to add throttle input to get it running. But this morning cold start was still great and I was seeing TPS of .2% slowly switching to maintain my idle speed, as well as seeing +2 trims at idle now, was -12.
Pulled down my MAF curve on up through 7k hz and have nice -2 trims through that band. Achieved that applying 75% error and smoothing.
The nerd in me was enjoying playing with the P-I data last night and watching the changes to the idle error recovery. I made good progress and have some notes of next steps to try. It?s fun to have this kind of mind challenge again!