Hello all,
i am by all means not looking for a free ride here but more looking for someone with experience tuning diesels.
i have tuned hundreds of LS and Ford stuff but never really touched much common rail.
i have attached the file of the vehicle that i am able to tinker with.
it is a 2014 Ford ranger 3.2 diesel 6 speed manual.
I was firstly going to start with raising the torque management and adding some more injector pulse width at high load and increase boost and rail limits then log.
is this a good start?
i know there is HEAPS more that can be done but i am just looking for a safe reliable vehicle at the end of the process.
i will have full access to an EGT gauge whilst logging.
Thanks heaps