FWD TCM to control RWD 4L60E

[Fastmax32168]

I am collecting parts for my current project, and the route I prefer is to take say an 06 FWD 3900 and make some changes to it in order to use it as RWD. In order to get everything to bolt together I would need to use a 4L60E out of a 2000 vintage S10 that originally came on the 2.2 4 Cylinder. My question is if I can take the TCM that would come with the 06 3900 and program it to control the 2000 4L60E? Thanks, Roy

[blindsquirrel]

All T42 TCMs can run any T42 calibration, the hardware all interchanges across all years/platforms.

https://www.rockauto.com/en/moreinfo.php?pk=11359277

Whether you can find a TCM OS that'll work with a '00 transmission AND the ECM OS you'll end up with, that a different subject. (the 2000 S10 didn't use separate ECM/TCM - nothing back that far did)

[TheMechanic]

If you want a FWD for RWD I would have picked something like a 2005 Monte Carlo. Has a 3.8 supercharged engine. Lots of mods possible and lots of support for HP Tuners.

[blindsquirrel]

90 degree V6s should all be rounded up and destroyed with extreme prejudice. They sound so bad. Like, unhealthy bad. Always remind me of Marvin the Paranoid Android: "I think you should know I'm feeling very depressed. <sigh>"

[Fastmax32168]

The 3800 wont fit, its too wide.