injector change wont start

[oldkid]

this tune works.hpt

new injectors stoich back to stock.hpl

[edcmat-l1]

The MAF table is incredibly low. That's the reason it won't run with the 0% stoich doubled. If you're trying to swap injectors and scale them correctly you need to put the MAF table back to stock and tune from there.

[oldkid]

Thank you

[oldkid]

Would not run with stock maf.

[edcmat-l1]

Would not run with stock maf.

And where is the tune file and data log?

You're doing something wrong. This is a standard procedure type deal.

[blindsquirrel]

And where is the tune file and data log?

You're doing something wrong. This is a standard procedure type deal.

Good luck, buddy.

[oldkid]

No luck needed. Deep pockets and a real tuner will get it going next week. I won't ask any more questions.