Help with getting a base tune on a '06 silverado 2500 6.0 4l80e

[Luis_Martinez1118]

I need some help on getting a base tune for my '05 Silverado LB 6.0 4l80e with a truck norris cam. Everything is else bone stock aside from the cam, springs, lifters. Truck is a service truck so i don't need anything crazy

any help would be appreciated

[Alvin]

I do this 5 days a week 9-5 if you need help. Website in signature.

[[email protected]]

I can help you sent u a email

[MarcWolfe]

Can probably find a good dyno sheet comparing that cam to a stock cam. The percentage of difference seen on the graph at various RPMs, is the percentage of change you make to VE. Then look into startup and idle tuning if needed. How I'd start off anyway.

[Lshungy]

Can probably find a good dyno sheet comparing that cam to a stock cam. The percentage of difference seen on the graph at various RPMs, is the percentage of change you make to VE. Then look into startup and idle tuning if needed. How I'd start off anyway.

Are you serious !!!! ??? You cant possibly give that sort of advice out, the amount of variables in that scenario it's ridiculous to even think that idea would work.

[blindsquirrel]

Are you serious !!!! ??? You cant possibly give that sort of advice out

Uh, check his post history. He most definitely can give that sort of advice, and does it in every post. Then attacks any sort of criticism with some specious experts-are-stupid mumbo jumbo.

[Lshungy]

Unfortunately I have been reading his posts and I normally hold my tongue but I couldnt resist this time.

[edcmat-l1]

Unfortunately I have been reading his posts and I normally hold my tongue but I couldnt resist this time.

Completely understandable.