2 Step for Consistant Launches

[arthansen]

Take a look at this thread in the V8 section.



Someone came up with the idea of using the P/N rev limiter as a Shudder box to get consistant launches. Turns out it won't work on the V8 but it is awsome on the V6. Here is my post from that thread:


I finally made it to the track and had a chance to test this idea.

WORKS GREAT.

Three runs, here are my 60 foot times.

2.149
2.184
2.181

Street tires and a V6.

They were the easiest launches I have ever had. No thinking, just let it bounce off the limiter and let the clutch off and floor it. A monkey could have done it (kind of like an automatic ;D )

It sure works for the V6. Maybe someone can figure out how to make it work on the V8.

[Missing2]

I am allready happy with the 2.0*'s I cut on lame arsh kumho 712's
no lca's no touque arm, no relocations brackets.. full weight..

all i have out back is my psudo-coilovers, bilstine HD's, the big le1 swaybar and an adjsutable pan hard rod..

my launches are UGLY/painfull to watch.. but cut good times for a v6.. I want high 1's next spring though when I get around to updating my suspension..

[Nightrida]

autos rule. 2.00 bfg street tires and a peg leg.

a 2step would be nice for some.

[arthansen]

This would be for cars with manual transmissions.

You lazy guys with autos don't need it.

;D

[johnt]

You lazy guys with autos don't need it.

Yea, we just get better results naturally.

....especially if we're FWD ;D

John

[Little_G]

I used this the last couple of times, its great!