-
Advanced Tuner
Looked, but no find. Bins for TSP torquer cam?
Just want something to compare against to help me learn a bit better, and also to give me some hints as to what else I should start adjusting for a bit better performance.
Searched the bin database, but to no avail nothing for the 01-02 year f-body similar to my setup.
Have TSP Torquer II, FLP Longtubes catted, catback w/ QTP cutout, ported TB, Lid, and smooth bellows. All in a 2002 WS6, w/ M6.
If anyone has anything close to this, lemme know. Appreciate it!!
-
Tuner in Training
Same here...
Same here, was looking for a bin to see where I need to start at. My Torquer 2 is going in very soon... finally.
---Sebastian Lopez Jr.
www.LopezRacing.com
2002 Camaro Z28
1997 Camaro RS
1968 Camaro NHRA #4143
-
Tuner
Here's a bin file for a torquer and some home ported heads at 10.85:1 compression. Its an open loop-MAF tune. The MAF is scaled +45% since its ported. You can probably use some of it as a starting point. Im always working on this, so its not final at all, but hopefully itll help you with a baseline tune.
http://www.ihearyou.com/~tony/tuning/current/
Mods in sig.
- 2002 - M6 - Hurst/LSS - No TCS
- 232/234 .595/.598 112 +2 - 7.4 PRs - Melling Lifters
- Stage 1 DIY Heads - Milled .040 - 10.9:1 CR - PP Golds
- Jethot LTs - DIY True Duals - Magnaflow 2.5 - SLP CME - Dual Cutouts
- Motive 4.10s, Moser Axles, SLP cover, Built 10 bolt
- TSP lid - FTRA - Ported TB - Ported MAF
- HPTuners - LC1 - Matched SVO 30s
- TTIIs - 275/315 - SFCs
-
Tuner in Training
Thanks man. Cam came in today, hope to get it installed and play around with it all this weekend.
---Sebastian Lopez Jr.
www.LopezRacing.com
2002 Camaro Z28
1997 Camaro RS
1968 Camaro NHRA #4143
-
Senior Tuner
tsp torquer 2
1st file is in a 2004 M6 GTO - Made 430/408
2nd file is a 2002 A4 Fbody - unknown hp/tq...but it ran like a MotherF**ker
Last edited by S2H; 07-13-2006 at 10:36 PM.
-Scott -
-
Tuner
I have a 01 c5 withthe torquer v2 cam all sorts of problems
IT surges bucks and dies all the time it was tuned .Can some one fix what i have thanks
Last edited by roysvett; 04-27-2008 at 08:23 PM.