Results 1 to 3 of 3

Thread: Idle relearn

  1. #1
    Potential Tuner
    Join Date
    Apr 2019

    Idle relearn

    I have the mpvi2.. I can?t find the idle relearn function . Can anyone help me ? It is in the scanner right ?

  2. #2

    Perform the following relearn procedure for the on-board computer to adjust to the new idle position on the electronic throttle body.

    1. Start and run the engine in PARK for 3 minutes.

    2. Turn the engine OFF for a minimum of 60 seconds.

    3. Start the engine and run for another 3 minutes.

    4. Engine should idle normally after 3 minutes.

    After having performed the relearn procedure and the engine still does not run within normal idle speed, it will be necessary to drive the vehicle above 45 mph (70 Km/h) including several decelerations. Also ensure that after driving the vehicle, let the engine idle for a minimum of 5 minutes.

    If the engine has returned to normal idle speed, the relearn procedure is completed.

    If the idle speed is still erratic or incorrect, restart idle relearn procedure.

    2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, Custom paint-matched Bowtie emblems, Custom painted SS emblems, BMR strut tower brace, CAI - Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Bo White Ported/Polished throttle body, Custom DiabLew Tune

  3. #3
    Tuner in Training
    Join Date
    Aug 2016
    Can someone elucidate on what is suggested by "Idle Re-Learn'