Results 1 to 3 of 3

Thread: Cai Tune 06 300C SRT8

  1. #1
    Potential Tuner
    Join Date
    Jun 2021
    Location
    Ireland
    Posts
    3

    Cai Tune 06 300C SRT8

    Hello Guys,

    I'm new to tuning and trying to figure out what parameters to change in Editor.

    I got 2006 300C SRT8 using mpvi2, mods are only K&N Cai, 180stat, oil catch can and muffler removed.

    I changed simple parameters for my 180stat but I would like someone to advice what to change for the Cai.
    I had diablo intune before and the car was a bit quicker in response but I will look into that in future.

    Thanks

  2. #2
    Advanced Tuner
    Join Date
    May 2018
    Location
    Germany
    Posts
    207
    Instead of MAF you have to dial in your injectors - opening time vs fuel in g per seconds - logged by fuel trims.
    Search for it in the forum, there are some instructions.
    After that you have to correct ve table in closed loop.
    Open loop can only be tuned with a wide band. Mostly the engine runs a little rich in open loop to be save for all regions.
    Its a long way to learn tuning and not that easy. Copy and paste didn't work, every setup is different.

  3. #3
    Tuner
    Join Date
    Oct 2005
    Location
    baton rouge la
    Posts
    163
    donalic.hpt

    See if this feels any better