Hey everyone. Im new to hptuners but have been reading alot about it along with videos and tutorials, however, Im coming across something that may just be a basic mistake, or something more.
As the title states, its a 6.0L, with a btr stage 3 cam ( turbo ), but not turbo hooked up yet, this will be n/a for the time being. Ive also got an upgraded intake, as well as a 102mm throttle body. I had a 411 which came out of a turbo'd vehicle 2.5bar map, and no maf, no O2s, and had 80lb injectors.
Since our motor had stock injectors, we bumped them up with VS racing 210lb 280158821 . Ive requested the INJ flow data to input into the pcm. however these are the 2 problems i came across
[Minimum Pulsewidth 0.125
Default Pulsewidth 0.125
Short Pulse Limit 3.25 ]
My first issue is Im unable to enter 0.125 into the min and def tables. When I try, it changes my values to 0.122 instead ( the pcm came with 0.198 loaded )
My second issue is more of a question. They provided flow values for flow vs. Manifold Vacuum. for standard, and scaled... however both rows have the same data..
Flow vs. Manifold Vacuum
(kpa) 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
g/sec 30.453 30.635 30.817 30.999 31.18 31.361 31.541 31.721 31.9 32.079 32.257 32.434 32.61 32.786 32.96 33.133 33.305
g/sec scaled 30.453 30.635 30.817 30.999 31.18 31.361 31.541 31.721 31.9 32.079 32.257 32.434 32.61 32.786 32.96 33.133 33.305
Is this correct ?
And last, Ill state that I did ( fire up ) the motor with the PCM as-is with previous tune.... Using my 210lb injectors. and the car did fire up but struggle to idle ( as expected ).
When I input the VS data for the new injectors, the car would not fire up at all.
as-is Tune is in the attachments. Any input would be appreciated, thank you.