What years is HP Tuners capable of tuning 4.3L V6's?
Kyle
What years is HP Tuners capable of tuning 4.3L V6's?
Kyle
\'00 Silverado 5.3L - bolt ons | tuning | suspension
None.....yet.
2013 Jeep Wrangler JK
3.6 V6
More MODs than Stock
2018 Ram rebel
5.7 Hemi V8
Stock
Any idea when?
\'00 Silverado 5.3L - bolt ons | tuning | suspension
The HP Tuners huys will have to field that one.
2013 Jeep Wrangler JK
3.6 V6
More MODs than Stock
2018 Ram rebel
5.7 Hemi V8
Stock
try tunercat.com, $379, no vin lock, covers any vehicle with same operating system (model years do not matter), and only 79 bucks to add each additional definition file (operating system). tunercat is only an editor though, does not include a scanner.
tc does not have this advertised on his site yet, just shoot him an email.
There is no replacement for displacement?&&sure there is, its called a Blower!
I just copied this off the HPT website:
GM V6 Trucks
01-04 Chevy S10 Pickup / GMC Sonoma 4.3 2 4
01-07 Chevy Silverado / GMC Sierra 4.3 2 4
01-04 Chevy Blazer 4.3 2 4
07-08 Chevy Equinox 3.4 2 6
01-05 Chevy Astro / GMC Safari 4.3 2 4
07 Chevy Uplander 3.9 2 6
01-07 Chevy Express / GMC Savana 4.3 2 4
01 GMC Jimmy / Oldsmobile Bravada 4.3 2 4
97-05 Pontiac Montana 3.4 2 4
06 Pontiac Montana 3.9 2 6
Unlimited Vehicle Group: not available
Someone is confused here, hope its not me.
Well how about that it is me, previous post
from July 2004
mjbell1
Last edited by mjbell1; 12-29-2007 at 05:53 PM.
"Blacky" 2005 Chevy Silverado Ext. Cab V6 4.3L
MSD 6A Ignition, Coil, Cap/Rotor, 8.5mm Wires
K&N Cold Air Package, Cat-Back Dual Exhausts
CFM Tech. Bored/Ported/Polished Throttle Body
Thermostat 180 Degree, Fuel Pressure Gauge
mjbell1
@mjbell1
This is a very old thread. 4.3L v6 was recently added. I am using HPT to tune my dad's 4.3L s10.
97 Grand Prix GTP (not going to bother listing mods in detail) 1 messed up 97 PCM with about 30-50% of a 2003 calibration and parts of a few others.
Actually we've offered software for 01+ 4.3's for several years now it was just until about 6 months or so ago that we started offering it for the older vortec pcm's though.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"