The only real function thing in here is the serial port communicaitons..
Cables
You can chose from B&B V1, V2 cable, Carputings LS1 Edit or an Other cable. When you select the cables it basically just sets the com info for you... Also..
V1 waits for 15 bytes before dumping to log
V2 dumps as it recieves the info. You must manually "reset" the V2 cable before you can send/recieve data.
Carputings cable sends a size byte first, then the data.
Other just dumps what it gets when it gets it no formatting
Send Data
To send a packet, just enter the hex you want to send with NO formatting...
to send $01 $6A $10 $F1 $3C
you would enter 016A10F13C.
Formmating the input string is not high on my priority list right now.
Packet Options
V2 Auto CSum. At the end of the B&B V2 packet is a csum byte. If you would like the software to calc it for you, check this.
It's a work in progress... give me your feedback.