Results 1 to 2 of 2

Thread: Problem VE tuning with vette..

  1. 04-22-2005 #1
    Phil99vette
    Phil99vette is offline
    Tuner
    Join Date
    Jan 2005
    Location
    Posts
    126

    Problem VE tuning with vette..

    I tried to setup the system to start tuning the VE table and once I load the program and unplug the MAF the car wants to throw a bunch of codes and goes into reduced power mode. I can start the car up with the MAF Plugged in and as soon as I unplug it the car goes crazy. What am I missing with the setup?
    Phil
    Phil
    1999 Corvette Coupe
    Worlds Fastest 346" N/A Coupe
    ProStreet Motorsports
    HP Tuner SD specialist All GM Vehicles
    2000 Mustang 438" LSx 4.70 @ 164
    ------
    NEW 346" N/A testing: 10.4 @ 132.4 N/A(875')
    NHRA Corrected: 10.21 @ 134 N/A
    Old Nitrous Best: 10.0 @ 138.89(181 DA)
    Reply With Quote Reply With Quote
  2. 04-22-2005 #2
    405HP_Z06
    405HP_Z06 is offline
    Advanced Tuner 405HP_Z06's Avatar
    Join Date
    Feb 2004
    Location
    Arlington, Texas
    Posts
    270

    Re: Problem VE tuning with vette..

    Quote Originally Posted by Phil99vette
    I tried to setup the system to start tuning the VE table and once I load the program and unplug the MAF the car wants to throw a bunch of codes and goes into reduced power mode. I can start the car up with the MAF Plugged in and as soon as I unplug it the car goes crazy. What am I missing with the setup?
    Phil
    Don't unplug the MAF sensor, just set the MAF Fail Freq to 0. It will set a p0103 DTC, but don't worry about it; It won't affect the tune. Some disable the DTC, but I like confirmation that the car is in SD mode.
    Aaron

    '03 Z06 Corvette - The Normal Stuff.....
    EFI-101, EFI Advanced, EFILive-101, Variable Camshaft Tuning
    EFI University Evangelist
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »