1) Will VCM Suite be able to modify or delete the PCM torque management (traction control) on the 3.8 F-Bodies? My car doesn't have a traction control button, but the traction control is alive and well, killing my power.
2) Will I be able to adjust expected values, i.e., transmission shift times, etc.?
3) I have Ease for a scanner, how does your scanner compare? I'm just wondering if I can (should) get rid of my Ease when I get this.
4) Would I be able to take something like the PWM control of the torque converter clutch regulator solenoid, and make it a on/off type value, i.e., instead of varying the duty cycle between 0% and 100%, would I be able to have it simply switch between 0% and 98% duty cycle?
5) For the Electronic Throttle Control, according to GM, throttle response is varied based on engine rpm and vehicle speed, i.e., 100% throttle at a standstill doesn't result in the same power output as 100% at 70mph. It appears this is a timing function, as the absolute throttle position has always been identical to the gas pedal position.
6) Last question, can we get on a sign up list for buying this? Thanks.