Are you guys changing the stoich afr to 14.7 under the fueling tab or leaving it 14.108? Just curious to see what everyone is doing with these.
Are you guys changing the stoich afr to 14.7 under the fueling tab or leaving it 14.108? Just curious to see what everyone is doing with these.
It should reflect the actual stoich value of the fuel being used.
If you are using pump gas with 10% ethanol, that would be correct.
question: 08 Lacrosse Super 5.3, E67 ECM I believe, I cant find a specific "Commanded A/F" table anywhere in the cal?
I changed the one labeled Stioch from 14.67 to 14.10 but my Commanded A/F Ratio did not change, it still reads 14.7:1 ?
using HP Tuners and scanning with Torque
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
06 Grand Prix GXP, LS4-full bolt ons, Tuned by me
How do I add the commanded a/f hi res to the scanner? thanks Jeff G
right click-insert pid in the table(primary) display.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
thnx Guys