Results 1 to 7 of 7

Thread: Car not going into WOT Lambda fuel

  1. #1

    Car not going into WOT Lambda fuel

    So I just noticed on a random log my car at WOT is running 1.00 Lambda, the fuel source is "CL Stoich." It wasn't doing that before and not sure what to do.
    Attached Files Attached Files
    Last edited by 02GTP; 08-05-2015 at 05:26 PM.

  2. #2
    Well I got it figured out. Don't change the two tables in the tq management section labeled "maximum torque" to the max. Don't know why but that was it.

  3. #3
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,431
    Quote Originally Posted by 02GTP View Post
    Well I got it figured out. Don't change the two tables in the tq management section labeled "maximum torque" to the max. Don't know why but that was it.
    Glad you figured it out.

  4. #4
    Tuner in Training
    Join Date
    Dec 2010
    Posts
    25
    I would also raise your tq limit timer while you're in there.

  5. #5
    Quote Originally Posted by FLtuner View Post
    I would also raise your tq limit timer while you're in there.
    Max it out?

  6. #6
    Advanced Tuner
    Join Date
    Jun 2008
    Location
    Tyler/Longview, TX area
    Posts
    746
    Quote Originally Posted by FLtuner View Post
    I would also raise your tq limit timer while you're in there.
    You PM box is full.

  7. #7
    Tuner in Training
    Join Date
    Dec 2010
    Posts
    25
    Quote Originally Posted by txcharlie View Post
    You PM box is full.
    I just cleared it out, thank you.