When logging timing histogram I can never get any cells below(lower than) 1.08 G/CYL to populate in the histogram. At idle it populates starting at the 1.08 row and increases from there and maxes the table out. It appears to be configured to start populating at 1.08 instead of .08 row. Best I can tell it appears to be a software glitch? Posted a screen shot of the histogram. Its happening on a 2015 2500 truck w/6.0. Any inputs before I e-mail support.
Thanks
Mike
Mind posting a log?
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
Thanks for helping
setup the histogram using calculated cyl air. I have the same truck, and beat my head against the wall for a couple weeks before figuring it out.
Try this.
Config3.cfg
That worked thank youOriginally Posted by JasonHD
Reply With Quote