Made my 1st changes today.
I attacked the torque management tables.
Engine torque management:
Under Torque Reduction: Normal, completely zeroed out this table.
Transmission torque management:
Under Torque Reduction: Normal, completely zeroed out this table.
Download went well, took 2 long minutes to 'write' ??
My Z28 'writes' in 20 seconds.
Will check out these changes on the drive to/from school tommorrow & report back.
Next change will be WOT AFR.
Since this product is new, there really isn't a lot of parameters to change yet.
There's enough to get in trouble with, & enough to make some BIG changes with...
Dave