2012CruzeVSS diagram1 copy.jpg
That was NOT easy. Had to bring into PS as .pdf, then save it a .jpg. I wonder what your going to get?
2016-03-27
I have tested this VSS input multiple ways.
1. Magnets mounted into the four mointing . bolts on front brake rotor, read by two wire sensor.
2. Proximity sensor pointed at the eight holes in the race only brake rotors.
3. Magnets mounted into four holes drilled into, non slip, front Ujoint, red bu two wore sensor.
Each of these inputs is fed into a Dakota Digital SGI-5E to convert the signal to digital sign wave. Speedometer correction is provided by the same box.
Del Long