Will it let us calibrate tire size, gears??
Will it let us calibrate tire size, gears??
Wil the new software support 2.24 and 2.25 files
thanks
jim
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
so, dumb question. are you able to layer the read outs/tables in the 3.2 version now? being bale to file through them, or clicking on one to bring it to the front instead of cramming everything into one display.
The most hated, make the most power.
93 Ranger. 5.3 D1X. 1069hp.
In Scanner? If so, no.. still same layout
I just installed 3.2.11 and none of my math parameters vanished. I still have them. Just an fyi.
How does the serial wide band connect? Through the dongle? Or plug into serial port on my laptop?
Or does my dongle get modified and fitted with a serial port? TIA
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock
My first thought howard lol
My second though Patrick.
It took me weeks to redesign 3.0 "configuration". Now im not willing to download the 3.2 yet. I have to computers with 2.24 and two with 3.0
Ill lay under the radar for awhile to see if problems get cleaned up.
I like what your doing, just not willing to have my clients cars be test dumbies. ill wait a couple weeks to download 3.2
So I have a couple issues, in editor if I click -+key the program crashes and if you copy AFR error and paste in VE it crashes program. I am attempting this with a GEN 3 LS1B PCM
same issue as before with RTT.. car is started and warm, In park while idling, open scanner and start logging, open RTT feature and the cursor is already hovering around blank cells.
enable VE vs rpm and everything looks okay
..until you click out of the RTT window and the scanner drops the wideband EQ error..
This was a known issue, why hasn't it been addressed yet?
I have a similar issue as the above post. and have had since I went to 3.1 beta every time I click the RTT icon my mvpi. Input 1 freezes. I have to completely close the scanner to have my input function again. This is making it impossible for me to use RTT in SD VE for wideband error.
Ported TVS1900 OD cogs 10.5psi | ID850 | Vaporworx CTS-V 1:1 | COMP 219/233 .606"/.605" 113+1 | Ported TB | Pacesetter 1 3/4 LT | Solo Mach X3