Custom PID's missing

[BMBSALES]

Changed laptops, but copied all files on old lap first...but now when I go to my custom pid user defined list, only the stock ones are there. Where are they stored? Did I lose from changing laps or updating hptuners soft?

[schpenxel]

What version are you on?

[BMBSALES]

3.0 now, but was on a 2.24 beta

[schpenxel]

Update to 3.2. No use in trying 3.0, tons of bugs/issues have been fixed since 3.0 came out.

V3 and newer have most of the common PID's built in now so you don't have to create user defined PID's anymore for AFR error, boost, etc..

Beyond that you're probably just going to have to re-make them

[mowton]

Changed laptops, but copied all files on old lap first...but now when I go to my custom pid user defined list, only the stock ones are there. Where are they stored? Did I lose from changing laps or updating hptuners soft?

Look in Documents>HP Tuners>VCM Scanner>Maths....

Ed M

[BMBSALES]

Ok. I'm not sure I even see where you program custom PID's in the new software it's changed so much!

[mowton]

Ok. I'm not sure I even see where you program custom PID's in the new software it's changed so much!

Tools>Math Parameters>Math -- User

Ed M

[schpenxel]

ctrl+m

Boost, AFR error, EQ Ratio error, fuel trim totals and a slew of other things are "built in" now. Most of the common user defined parameters just aren't needed anymore. They're already there.