CAGS?Rear O2's? how do they get delete them?

[VETTEC5]

How do you delete the CAGS on a M6 '03 C5?
And if I have High Flow 3" Randam Tech Cats (Metal Matrix); do I have to delete my rear bank O2's???

How?

[Chris@HPTuners]

from the help files:

The parameters control the Computer Aided Gear Selection (CAGS or “Skip Shift”) feature of the VCM. It engergises a solenoid in the transmission to force shifting to 4th gear under light throttle conditions. If disable TPS is exceeded then the solenoid will not energise.

Disable %TPS: Throttle Position to disable C.A.G.S. routine

Enable Speed: Speed to enable C.A.G.S. routine
Disable Speed: Speed to disable C.A.G.S. routine

Enable Baro: Baro to enable C.A.G.S. routine
Disable Baro: Baro to disable C.A.G.S. routine

Min Coolant Temp: Minimum Engine Coolant Temp required for C.A.G.S. routine

[VETTEC5]

How about the High Flow Cats Bypass o2's or ???
How?????

[jimmyblue]

Might as well leave the rear tests be, unless the cats
are so ineffective they trip an efficiency fault. But they
should stay different enough from fronts that no delete
/ disable is required.

[silverTA2002]

I have the Jet Hot catted Y pipe, and it sets off my service engine light.

So I'd be interested in how to "delete" the rear o2s.

[99C5R]

engine diagnostics,DTC's, all dtc that have to do with "O2 sensor 2" SES disabled, 3 no error reported.

[silverTA2002]

engine diagnostics,DTC's, all dtc that have to do with "O2 sensor 2" SES disabled, 3 no error reported.

I did this and still got an SES light for "catalyst low efficiency."

So you have to turn those off as well.

Thanks for the info though!

[CatSkynr]

Have the same issue with JetHot. Just delete P0420 & P0430.

Engine Diag->DTCs->
420
430
set to OFF and option 3 (no error reported)

[jimmyblue]

I think if you have OBD-II smog nazis though, you want
to not disable the test, but leave it enabled and no
error. Though one day they'll probably catch wise to
that, right now I think they just check that the test is
there.