Has any one done combo like this?
2012 Dodge Charger 3.6 v6
65lb DW Injectors
SRT4 3 bar map (stock map used to get injector data right)
I got the injector data pretty good with the stock 2 bar setup. When installing the 3bar, and changing the Map sensor Linear data to match that of the SRT4 map sensor I get a baro low p0129 code and the car will not fire up. Baro reads 20psi.
If I let the car sit for 10min, go to fire it up but floor it, it fires up and reads the map sensor perfectly fine, but the baro PID still reads high and I have the p0129 code and will not start every time.
I tried looking in all data for a baro sensor or tip sensor but I think this setup might be all inferred?