Attention: The update will be sent in .exe format to the e-mail address you used for paypal. It will be aproximately 1MB in size. It may be over. If your mail box is through site like hotmail, the 1MB file may be rejected. If you have an alternate e-mail address please PM me your full name, Paypal e-mail used, and the e-mail you would like for the update to be sent to.
Please make sure you have enough room in your in box for the new file.
Files will be distributed without new help files. We will distribute new help files hopefully next weekend. This may be done via a web download.
I would like to send the 1.2.0 distribution out monday afternoon.
Here is the 1.2.0 change log as it stands today:
VCM Suite Info:
Last known good com port is stored and tried first.
Com ports through 6 are now scanned for interface.
Increased VCM Info logged information.
VCM Info default log save path is nolonger location of vcm info.exe
VCM Suite Info is now located in both the flash and scanner programs under the Help menu. It is no longer its own utility.
VCM Flash:
Last known good com port is stored and tried first.
Com ports through 6 are now scanned for interface.
Get VCM Info is now called Get VCM ID's to avoid confusion.
Improved Get Cable ID in VCM Flash.
Read fail issues requiring PCM fuse removal resolved.
Cable status nolonger shows disconnected when you first startup the program.
Added VCM Suite Info under the help tab.
VCM Editor:
Added support for a few 99 Y-Bodies.
Corrected PE vs RPM table limits for certain vehicles.
Corrected PE vs ECT vs MAP limits for certain vehicles.
Added trans type to Info form.
VCM Scanner:
Last known good com port is stored and tried first.
Com ports through 6 are now scanned for interface.
Fixed common overflow error.
Fixed crash error when chosing record while scanning.
MAF PID's fixed.
Added space bar start/stop for scanning
Added VCM Suite Info under the help tab.
Thanks for your suggestions and support!
- Keith