What are the main tables of tuning for e85?
What are the main tables of tuning for e85?
post your tune file so we can see whats available for as 1998 model
By the user name, I think he meant 18.
the main table would be the stoich AFR [ECM]2300. Unless you are talking about flex fuel.
Last edited by murfie; 03-28-2019 at 03:50 AM.
v-performance.pl/
facebook.com/veee.performance/
https://www.instagram.com/v.performance.pl/
Remote tuning:
[email protected]
+48 697276579
Sorry guys 2018
thanks got that set at 14.7 what im trying to change is afr at wot full boost (13 psi) tps 100%
data shows .70 lambda (10.3) i would like to lean that point more towards 0.85 (12.5).
i just cant seem to find the correct tables to change. the roush tune im running has PE delayed/off to 120 seconds. i have a 2018 5.0 f150 and installed the roush
supercharger with tune. LEARNING using hp tuners. thanks so much
looking at this its at stoich thanks read my reply see what you think and not sure how to upload my tune and data
how can i attach my tune to this thread?
I think I figured it out my MAP max before combustion stability is set to allowing CS to take over at low boost
Ecm 44821. So changed Cs to where I want to be. (ecm 33784)
Data log shows lambda as the Cs tables are written.
I will load the new tune and update thanks
Made a few short rolling test hits today for data Lambda is exactly where i wanted it .85 (12.5) afr. so I will try to lay down some actual short runs by the weekend.
13 PSI
.85 lambda
100% TPS
10 DEGREE TIMING
93 OCTANE
WHAT DO YOU THINK? POSSIBLE MORE TIMMING?