I noticed that the Stock tune for my car has a PE enable MAP setting of 15 and MAP hysteresis of 6 (meaning that it goes out of PE mode at 9). Problem is, I noticed that even at WOT, my map readings are ranging from 14.21 to 14.36. I would take this to mean that I'm never going into PE mode. I also have ltft's of around 8.6 at WOT. I need to richen things up at WOT and I'm Thinking of first moving the MAP setting to 14 to ensure I'm in PE mode. Then adjusting ltft's through the IFR table. Is this a good idea or not? ???