I just got my HP Tuners this week and after some trial and error, it solved my issue. I drive a 2014 SS sedan with LSA, 4" cai, catless, stock fp(ZL1), LSA stock injectors, stock pulley. I was losing fuel pressure. So I licensed the FPCM and upped the Min Desired Pressure to 58psi. That didn't solve my problem. Then I increased the Fuel system min voltage to what's attached. That solved the problem. However, now I've seen psi in the 70-80 range for about 10 seconds from 2,000 to 750 rpm. I'm worried about burning out the fuel pump. Any recommendations on what I've done with the voltage? Any help is appreciated.