Originally Posted by
dantheman1540
Thank you for the response.
MAF should be failed with High RPM Disable set to 10,000 RPM as well as, with the MAF Freq Fail High set to 0Hz. I do have MIL P0103 set to no error reported but I assumed that just eliminated the engine light but kept the MAF failed.
VE table is only ugly because I tried adding a significant amount of fuel in the cells where it's showing lean but it seems to have no effect. I'm going to check for an exhaust/vacuum leak later but I don't hear one and have inspected it pretty well in the past.