How do these tables work as far as adjusting them?
The PCS 30268 table under Pressure Control Solenoid Characteristic you can change the Milliamps for a set BAR Pressure.
So is the TCM commanding a MA?
Lets say at WOT in Track Mode it commands or at least I log the MA is at 170ma and looking at the table thats about 18bar, If I raise the table by 15ma that looks like 170ma will now be at 21.1 bar of pressure.
So raising the complete table by 15ma should increase pressure everywhere Correct and give a firmer shift or am I looking at this wrong.
I read somewhere that lowering the table would increase shift firmness, I'm confused how this works.
Can someone help me out to understand this Please!
Then the TCC 30269 table looks opposant like lowering this table would increase pressure in Bar to TCC, is that correct?
HPT PCS TCC 2.png