Results 1 to 3 of 3

Thread: 6.0 tuning parameters clarification.

  1. 04-06-2025 #1
    ESERIES6.0
    ESERIES6.0 is offline
    Potential Tuner
    Join Date
    Mar 2025
    Location
    PORTLAND
    Posts
    3

    6.0 tuning parameters clarification.

    Is there anyway to add more scaling slots to x or y axis? Prob not but thought id ask?

    What Injection timing map is used when boost in between the thresholds of full boost/no boost?

    FICM PW1,2 / INJ delay 1,2 are identical copys , however INJ PW MULTI 1,2 slightly different. Any reason why this would be giving the the other two are copys ? Why is there two PW anyway?

    thats it for now.
    Last edited by ESERIES6.0; 04-07-2025 at 04:50 PM.
    Reply With Quote Reply With Quote
  2. 05-25-2025 #2
    vintagespeed
    vintagespeed is offline
    Potential Tuner
    Join Date
    Oct 2020
    Posts
    3
    i assume the ecm interpolates between the min/max tables using map.
    Reply With Quote Reply With Quote
  3. 1 Week Ago #3
    beardoperator
    beardoperator is offline
    Potential Tuner
    Join Date
    Dec 2022
    Posts
    5
    Quote Originally Posted by vintagespeed View Post
    i assume the ecm interpolates between the min/max tables using map.
    It does interpolate between the maps. Think of it as using the no/full boost maps to create the minimum and maximum boundaries within a 4-D map.

    I have not figured out how the ECM determines what "min" and "max" boost is yet.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »