Race Ready Tuning GM Gen V.Channels.xml
Race Ready GM Gen V Layout.Layout.xml
These are our Generic channels to start with when tuning Gen V vehicles.
If you're doing VVE on a stock cam or VVT camshaft vehicle, you'll need to set the corresponding filtering function in the histograms for whatever positions you'll be targetting.
These should give you majority, if not all the info needed to get majority of the Gen V vehicles dialed in.
If you are wanting to tune Injection Timing you will also need to add Primary SOI and Primary EOI to the channel list. I have a tab pre-built for the injection stuff also at the bottom but I don't run SOI or EOI in these channels on my laptop as it causes these channels to run very slowly and sucks to get data. I end up changing my channels to solely Injection Timing Channel list when it comes to that. If you have a nice laptop, you may be able to add them both without any issues.