Injector Data Repository

[DBruce]

Probably should be one in the HPT tune repository.

To get access, they say to send an Email. Unfortunately the Email account they specify is closed.

[TheMechanic]

A manual transmission would be preferred, but anything would do. I am interested in things like acceleration enrichment as well as the base fuel.

DBC MANUAL TRANS 4.8 2002 P01 12212156 2wd SILVERADO 1GCEC14VX2Z163908 BASE STOCK READ.hpt

[gtstorey]

Unless something has changed, you log into your account on HPT (not the forum) and can access the repository to download.

[DBruce]

Unless something has changed, you log into your account on HPT (not the forum) and can access the repository to download.

Got it. Thankyou.

[Nocupsince93]

Thanks

[Nocupsince93]

I'll apologize in advance as I know that this information is listed in the repository however I do not have access or can't find the tables I'm looking for . After spending countless hours searching I'm now doing the walk of shame and asking if Blind Squirrel could so kindly provide me with a spreadsheet for the L59 injectors ( 1258046,88894361,89017586) mine are specifically the ones ending in 426 ..also mine would be the returnless /58 psi (05 -07) I have seen that you've done this in the past and the poster was ridiculed so let the bashing begin . I have broad shoulders so whatever it takes to get that injector data it will be worth it. Sorry for any inconvenience but any help would be greatly appreciated

[dhoagland]

I'll apologize in advance as I know that this information is listed in the repository however I do not have access or can't find the tables I'm looking for . After spending countless hours searching I'm now doing the walk of shame and asking if Blind Squirrel could so kindly provide me with a spreadsheet for the L59 injectors ( 1258046,88894361,89017586) mine are specifically the ones ending in 426 ..also mine would be the returnless /58 psi (05 -07) I have seen that you've done this in the past and the poster was ridiculed so let the bashing begin . I have broad shoulders so whatever it takes to get that injector data it will be worth it. Sorry for any inconvenience but any help would be greatly appreciated

I'm confused
What are you starting with? I'm assuming some 25lb injectors and are upgrading to 36lb injectors? In the same engine L59?

[dhoagland]

I'll apologize in advance as I know that this information is listed in the repository however I do not have access or can't find the tables I'm looking for . After spending countless hours searching I'm now doing the walk of shame and asking if Blind Squirrel could so kindly provide me with a spreadsheet for the L59 injectors ( 1258046,88894361,89017586) mine are specifically the ones ending in 426 ..also mine would be the returnless /58 psi (05 -07) I have seen that you've done this in the past and the poster was ridiculed so let the bashing begin . I have broad shoulders so whatever it takes to get that injector data it will be worth it. Sorry for any inconvenience but any help would be greatly appreciated

This is an 2006 L59 Flex Fuel if that helps.
Pretty sure this is returnless...

I added a 2003 Flex Fuel
I'm pretty sure is return Vac-Referenced to compare

[Nocupsince93]

The original engine is a L33 (5.3) with the original injectors . I've added a 220-224 cam , intake , headers . When data logging the car I realized the injectors were at 100% at 5000rpm and at 120% at 5600 . So I'm trying to use my same fuel system with the corvette regulator ( non return ) and figured the flex fuel L59 were my best bet . I hope the original question fills in the gaps ? Thanks again

[gametech]

I'll apologize in advance as I know that this information is listed in the repository however I do not have access or can't find the tables I'm looking for . After spending countless hours searching I'm now doing the walk of shame and asking if Blind Squirrel could so kindly provide me with a spreadsheet for the L59 injectors ( 1258046,88894361,89017586) mine are specifically the ones ending in 426 ..also mine would be the returnless /58 psi (05 -07) I have seen that you've done this in the past and the poster was ridiculed so let the bashing begin . I have broad shoulders so whatever it takes to get that injector data it will be worth it. Sorry for any inconvenience but any help would be greatly appreciated

Squirrel hasn't been around for over a month. Last post complained of his IP being blocked.

[Nocupsince93]

I appreciate everyone's help and I realize that Squirrel hasn't posted recently. However I asked for him specifically because he posted a screenshot of the injector data previously for another member . For some reason I cannot open or get access to any files /downloads . I was hoping someone could provide a similar spreadsheet for the L59 and o would just fill in the numbers one by one . Thanks again

[dhoagland]

I appreciate everyone's help and I realize that Squirrel hasn't posted recently. However I asked for him specifically because he posted a screenshot of the injector data previously for another member . For some reason I cannot open or get access to any files /downloads . I was hoping someone could provide a similar spreadsheet for the L59 and o would just fill in the numbers one by one . Thanks again

[Nocupsince93]

That's everything I needed ! Thanks for going the extra mile I really appreciate it! That should get this old L33 working like it should .

[horsepowerguru427]

dhoagland I love how its literally screenshots from the tune file you posted lol