2024+ F150 5.0 tuning

[AlNuaimi]

Now that tuning is supported for the 24+ F-150, I will be posting a stock file soon and begin testing different setups. I will share results here as I go.
If anyone has suggestions, tips, or things they would like to see tested feel free to drop them in!

[Legg95]

I?m excited to see where this goes.

[veeefour]

Made even more than S650 :O

image.jpg

[smithspeed]

Nice graph, I'm curious as I still haven't found an answer, can the speed limit be raised on the 2024+ f150s, or is it stuck like the S650's?

[AlNuaimi]

Amazing results!! keep it up brother

[AlNuaimi]

This is the stock read. So far I just removed the speed limiter. I dont know why i need to do a write entire every time I flash the car. Its annoying

[AlNuaimi]

Made even more than S650 :O

image.jpg

whats the mod list and fuel ?

[veeefour]

whats the mod list and fuel ?

First is bone stock, next tune, next long tubes and next e85

[veeefour]

I can say gen 4 in on par with gen 3 - s650 is basically gen 3 and we made like 7hp less on s650 with same mods...

[Pistol_91]

The s650 flows better up top, no?

[smithspeed]

did raising the speed limit actually work, I keep getting conflicting message here, I believe HP says it can't be done on the 2024+ mustangs and f150s

[AlNuaimi]

did raising the speed limit actually work, I keep getting conflicting message here, I believe HP says it can't be done on the 2024+ mustangs and f150s

I will test it out and report back

[AlNuaimi]

did raising the speed limit actually work, I keep getting conflicting message here, I believe HP says it can't be done on the 2024+ mustangs and f150s

Speed limiter is raised and it is doing as commanded. (200km/h)

[CrawdaddysBACON]

On the 2024s how are yall connecting? I went to read the stock file and it will not pull anything back up

[AlNuaimi]

On the 2024s how are yall connecting? I went to read the stock file and it will not pull anything back up

Do you have the latest firmware?

[KeyzTuning]

Getting ready to tune a stock 24' before we add boost. Subd...

[AlNuaimi]

I have raised the RPM limiter to shift at 7600 RPM as a test. I still need to determine the actual peak power RPM for this vehicle, which I will confirm through Dragy comparisons or a dyno session. Next, will fine tune the WOT PE lambda, as it?s currently running a bit rich.

[AlNuaimi]

Anyone disabled the VDE before?

[smithspeed]

hey I heard the speed limited only goes up to 130mph, so has anyone confirmed you can crank the speed limit past 130mph? (200km/h I believe is 120) about to get one on the dyno next week so will know for sure then, but trying to set expectations with a guy.

[b00sty]

hey I heard the speed limited only goes up to 130mph, so has anyone confirmed you can crank the speed limit past 130mph? (200km/h I believe is 120) about to get one on the dyno next week so will know for sure then, but trying to set expectations with a guy.

check & see if its hitting a torque source & it possibly wont be a speed source?