Can anyone tell me why histogram tables 3-8 are not reading out in 2 BAR kPA?
Thanks
Can anyone tell me why histogram tables 3-8 are not reading out in 2 BAR kPA?
Thanks
2004 Half Nekkid Z71 Avalanche Vortech Blown 5.3L, Pacesetter LT's, Stage 2 Patriots, and 216/224 .551/.551 115 LSA w/ 1.89 VHP Rockers, 60# flow matched injectors, LC-1 Wideband, 2600Edge Racing Stall, 80mm BBK TB, 160 deg thermo, E-Fans, Volant CAI, Walbro GSS341, 3" Borla exhaust, HP Tuners, Custom 2 BAR Tune, Water/Meth kit, Transgo 4L60E-HD2, 3.73's, Nav sys, ON*, XM, DVD player, headrest monitors and backup cam. 498/492 ft lbs
Yeah, I deleted the stock MAP in the table and enabled the 2 BAR MAP. My boost table 8 in the histogram is reading boost correctly, but none of the MAP referenced tables in the histogram are reading 2 BAR kPA....
I am sure I am overlooking something simple......
2004 Half Nekkid Z71 Avalanche Vortech Blown 5.3L, Pacesetter LT's, Stage 2 Patriots, and 216/224 .551/.551 115 LSA w/ 1.89 VHP Rockers, 60# flow matched injectors, LC-1 Wideband, 2600Edge Racing Stall, 80mm BBK TB, 160 deg thermo, E-Fans, Volant CAI, Walbro GSS341, 3" Borla exhaust, HP Tuners, Custom 2 BAR Tune, Water/Meth kit, Transgo 4L60E-HD2, 3.73's, Nav sys, ON*, XM, DVD player, headrest monitors and backup cam. 498/492 ft lbs
Hey Sierra, I just deleted my VCM_Scanner.cfg and rejacked into the truck... works fine now....
Good Luck
2004 Half Nekkid Z71 Avalanche Vortech Blown 5.3L, Pacesetter LT's, Stage 2 Patriots, and 216/224 .551/.551 115 LSA w/ 1.89 VHP Rockers, 60# flow matched injectors, LC-1 Wideband, 2600Edge Racing Stall, 80mm BBK TB, 160 deg thermo, E-Fans, Volant CAI, Walbro GSS341, 3" Borla exhaust, HP Tuners, Custom 2 BAR Tune, Water/Meth kit, Transgo 4L60E-HD2, 3.73's, Nav sys, ON*, XM, DVD player, headrest monitors and backup cam. 498/492 ft lbs
03Sierra, post your log file.
If your log is set properly, then you have a user defined PID that is causing the error.
We got this guy Not Sure, ...
OK, I have narrowed my issue down to the custom pid I created and added to the table view. Everytime I add the [SENS.30.IMP]-14.5 PID to the table, my histogram takes a crap. I assumed this might be caused by the SENS.30 referencing a 1 bar sensor, so I changed the function in the PID to [PID.2333] to reference the 2 BAR MAP. Same results. Everytime I add the custom PID the Histo tables that reference MAP take a dump.
What are you guys doing different to log boost?
2004 Half Nekkid Z71 Avalanche Vortech Blown 5.3L, Pacesetter LT's, Stage 2 Patriots, and 216/224 .551/.551 115 LSA w/ 1.89 VHP Rockers, 60# flow matched injectors, LC-1 Wideband, 2600Edge Racing Stall, 80mm BBK TB, 160 deg thermo, E-Fans, Volant CAI, Walbro GSS341, 3" Borla exhaust, HP Tuners, Custom 2 BAR Tune, Water/Meth kit, Transgo 4L60E-HD2, 3.73's, Nav sys, ON*, XM, DVD player, headrest monitors and backup cam. 498/492 ft lbs
Do you have it defined as a MAP sensor? If so it's averaging it's value with the MAP Sensor value. Un-define it as a sensor and all will be well.
Always Support Our Troops!
It's always the small items, isn't it.....
Works like a champ by toggling off the MAP Reference....
Thanks...
2004 Half Nekkid Z71 Avalanche Vortech Blown 5.3L, Pacesetter LT's, Stage 2 Patriots, and 216/224 .551/.551 115 LSA w/ 1.89 VHP Rockers, 60# flow matched injectors, LC-1 Wideband, 2600Edge Racing Stall, 80mm BBK TB, 160 deg thermo, E-Fans, Volant CAI, Walbro GSS341, 3" Borla exhaust, HP Tuners, Custom 2 BAR Tune, Water/Meth kit, Transgo 4L60E-HD2, 3.73's, Nav sys, ON*, XM, DVD player, headrest monitors and backup cam. 498/492 ft lbs