I am having a tough time getting my LM1 to work , I thought I did everything I was supposed to but I must be missing something . It doesn't tell me the same afr in HP as my LM1 is reading out , I have the white wire on input 1 and the red on input 2 . I uploaded a log with my config , can someone check it out for me and tell me what I am doing wrong ? As always , thanks in advance .
what is your readout reading?
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
The LM1 readout is 12-15 throughout that log , the EIO reading doesn't change no matter what .
have you programmed either output of the LM1?
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
No .
well you'll probably need to program them so they have a 0-5v output and 10-20 afr. So start there.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
OK , will try that next , thanks !
Let me know if you get you LM-1 and HPT to read the exact same values. My readings are always .3 or .4 AFR different between the LM-1 screen and my histo.
I've tried slowing down the read rate on the LM-1 but it didn't make a difference.
ETP 215's 60cc
TR223/234 .636/.599 114lsa
Fast90/NW90TB
All bolt-ons -ewp
Reply With Quote