tuning part throttle 02 LS1 M6

[DooSPX]

what is the best way for tuning part throttle? the vehicle is stock w/ a lid. but wants a tune for great part throttle cruise and just a little more snappy to throttle adjustments.
we are going to tune WOT on the dyno, but we need to do the part throttle.
what should I be logging and adjusting?

thanks guys

[brantsz]

Look under the how to 's at the top of the board, lots of good info in there. I highly recommend using the wideband method if you have a wide band. You can tune part throttle via LTFT; this is a long and can be frustrating way to get your tune accurate. You will need to tune the VE table and MAF, if you do tune via LTFT I recommend bumping the PE enable up to not effect your LTFT's. If you plan to do many mods to your car, and change your tunes along the way a wide band is a good investment.

[DooSPX]

thanks... for WOT, we will be on the dyno w/ WB. but I can tune cruising with the LTFT's?