Never saw this before... the first one they had figure out in software and now its missing the most basic table of all 25 years later.How do we LOSE tables as time goes on LOL
Never saw this before... the first one they had figure out in software and now its missing the most basic table of all 25 years later.
Factory Stock 97 SS M6 13.51 @ 104.3 mph
Stock Longblock LS1 w/ 233/238 P.S.I. Cam
10.81 @ 126.9 Full interior, six speed on 275 radials, a decade ago
'99 TA trunk mounted 76mm 6 Liter
9.0s in '09 @ 153 MPH
Turbo 5.3 Volvo 740 Wagon
32psi and still winding out 5th on the highway somewhere
i don't think that was ever in a 98 LS1 file unless you applied a 2 bar COS and then it appeared in Engine Diag>Airflow.
I KNOW I tuned boosted 98s with right MAP sensor data in them??Originally Posted by 2xLS1
Factory Stock 97 SS M6 13.51 @ 104.3 mph
Stock Longblock LS1 w/ 233/238 P.S.I. Cam
10.81 @ 126.9 Full interior, six speed on 275 radials, a decade ago
'99 TA trunk mounted 76mm 6 Liter
9.0s in '09 @ 153 MPH
Turbo 5.3 Volvo 740 Wagon
32psi and still winding out 5th on the highway somewhere
Not on the stock 1bar OS.
Yeah it never showed up until you did the 2 bar OS on them.
[email protected] - [email protected]
Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs
no you didnt
It must been some years since Ive tuned a 98 that wasnt already a 2bar setup lol
Factory Stock 97 SS M6 13.51 @ 104.3 mph
Stock Longblock LS1 w/ 233/238 P.S.I. Cam
10.81 @ 126.9 Full interior, six speed on 275 radials, a decade ago
'99 TA trunk mounted 76mm 6 Liter
9.0s in '09 @ 153 MPH
Turbo 5.3 Volvo 740 Wagon
32psi and still winding out 5th on the highway somewhere
I opened a 98 F-body file with V2.24, V3.6, and V4.10 and it is not in any of those versions.
Reply With Quote